MiLAN MIL-RCM16A Specifikace stáhnout pdf (Strana 79)

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713

5. Check both ﬂ ow control valves. Refer to

the ﬂ ow control valve instructions in the

procedure for PLATFORM RAISES AND

LOWERS UNEVENLY.

4. Check for bent and broken parts on the

Liftgate that could interfere with normal

operation.

2. The “B” solenoid valve (FIGS. 74-1

and 74-2) may be stuck in the “open”

position. Remove the “B” solenoid

valve (FIG. 79-1). Next, check the

valve cartridge as follows. Push on

the plunger in the valve by inserting

small screwdriver in the open end (FIG.

79-2). If the plunger does not move

with a smooth, spring-loaded action

(approximately 1/8”), replace the valve

cartridge.

3. Reinstall “B” solenoid valve (if good) (FIG.

79-1) or a replacement. Torque valve

cartridge to 30 lbs.-ft. and hex nut to 30

lbs.-in.

Make sure Liftgate platform is open and resting on the ground before per-

forming the following step.

WARNING

To prevent damage when installing valve cartridges & coils, torque valve

cartridge nut to 30 lbs.-in. max.

CAUTION

TYPICAL SOLENOID VALVE

REMOVED & DISASSEMBLED

FIG. 79-1

COIL

VALVE

CARTRIDGE

NUT

CHECKING VALVE CARTRIDGE

FIG. 79-2

VALVE

CARTRIDGE

1/8”

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 85 86

Žádné komentáře

MiLAN MIL-RCM16A Specifikace Strana 79